LevelOne FBR-2000 User Manual Download Page 64

Page: 64 / 312

Configuring the Interface Settings

Internal Interface

Using the LAN

Interface

, the Administrator sets up the LAN network. The LAN network will

use a private IP scheme. The private IP network will not be routable on the Internet.

IP Address:

The private IP address of the Multi-

Homing Gateway‟s LAN network is the IP

address of the LAN port of the device. The default IP address is 192.168.1.1.

If the new LAN IP Address is not 192.168.1.1, the Administrator needs to set the IP Address

on the computer to be on the same subnet as the Multi-Homing Gateway and restart the

System to make the new IP address effective. For example, if the Multi-

Homing Gateway‟s

new LAN IP Address is 172.16.0.1, then enter the new LAN IP Address 172.16.0.1 in the URL

field of browser to connect to Multi-Homing Gateway.

NetMask:

This is the netmask of the LAN network. The default netmask of the device is

255.255.255.0.

Ping:

Select this to allow the LAN network to ping the IP Address of the Multi-Homing

Gateway. If set to enable, the device will respond to ping packets from the LAN network.

Http:

Select this to allow the device WEBUI to be accessed from the LAN network.

Summary of Contents for FBR-2000

























































































































































































































































































































Search results

Summary of Contents for FBR-2000

Reviews:

Related manuals for FBR-2000

Brands by name

Popular brands

LevelOne FBR-2000, User Manual

Search results

Summary of Contents for FBR-2000

Reviews:

Related manuals for FBR-2000

Brands by name

Popular brands