9
2.3 Procedure for Hardware Installation
1.
Setup LAN connection:
Connect
an Ethernet cable from your computer’s Ethernet port to one
of the LAN ports of this product.
2.
Setup WAN connection:
Prepare an Ethernet cable for connecting this product to your
cable/xDSL modem or Ethernet backbone.
3.
Power on:
Connecting the power cord to power inlet, this product will automatically enter the
self-test phase. When it is in the self-test phase, the indicator M1 will be lighted OFF for about
15 seconds.
Finally, the M1 will be continuously flashed once per second to indicate that this
product is in normal operation.
