DSA-1000 Network Device Server For PRT-1000 Thermal Printer
Quick Installation Guide
8
3. Getting Started
Step :
1. Once the hardware installation is done, set the IP segment of the administrator's computer to be in the
subnet of
192.168.2.x
. Since the DSA-1000's default IP address is
192.168.2.253
, make sure no other
network devices are assigned an IP address of
192.168.2.253
.
2. Launch a web browser to access the web GUI of DSA-1000 by entering
“
http://192.168.2.253/setting.htm
” in the address field.
3. After a successful login, the “
Setting
Page
” will appear on the screen.
4. Set
COM1
Settings
for communicating with
PRT-1000
Thermal Printer.(The default COM1 Setting
already matched with PRT-1000)
5. Configure IP Address in the same range of
WHG-1000
.(The default WHG-1000's LAN IP address is
192.168.2.254
)
6. Select desired
Server Listening Port
, default is
5000
.
7. Click
Apply
button to enable New setting.
