DSS-1000 User Manual
12
Device Overview
Item
Description
1
Power LED
Lights RED when the power is on.
2
System Ready LED /
Factory Default LED
Lights GREEN after the boot up process is complete to
indicate DSS-1000 is ready.
When doing a factory reset, this LED lights GREEN briefly
to indicate factory default setting restoration has started.
The LED turns off and lights up again when the restoration
completes and DSS-1000 is ready for use.
3
Reset Button /
NTSC and PAL Switch
Use to restore DSS-1000 to its factory default setting.
Use to switch between NTSC and PAL functions.
4
DC 12V Power
Connector
Connects the bundled power adaptor and terminal block to
on page 16.
5
USB Port
Connects a USB device, such as a mouse, keyboard or hub,
to DSS-1000.
6
Ethernet Port
Connects to the network using an Ethernet cable.
