6
Vertical Rotation Mode
(Manual Levelling)
The AUTO1
TM
can be placed on its side with the side mount plate attached
and used for vertical rotation, this can be handy for any indoor vertical
alignment off the rotating beam.
To operate the AUTO1 in vertical rotation mode DO NOT unlock the pendulum,
leave it in the “OFF” position, use the adjustment screw on the side mount to
level off the bubble vial on the AUTO1. Once the bubble is central in the vial
press the power button on the laser and the laser head will begin to rotate,
the rotating beam being a vertical line and the dot beam being level.
Another application where the vertical mode can be usefull is site squaring
by aligning the dot laser beam along one axis of the 90 degree square and
then using the receiver to pick up the rotating beam which is at 90 degrees
to the dot laser beam.
Laser Wavelength
635nm <1mW
Laser Class
II
Range with LR700 Receiver
240m diameter
Accuracy
±4mm/20m
Self Levelling Range
±3
o
IP Dust Water Resistance
IP54
Workin Temperature
-10
o
C to +40
o
C
(in shade)
Power
6 x “AA” Alkaline
Low Power
Power LED Flash
Size
132x120x160mm
Weight
1.5Kg
AUTO1
TM
OPERATING INSTRUCTIONS
