1
2
INSTALLATION GUIDE
1. When mounting the heater on to the wall
ensure the heater is unplugged from the mains
socket and all power switches are turned off.
A suitable wall mounting area requires at least
150mm of empty clearance on ALL four sides.
3. Position the bracket on the wall in the desired
location and mark the holes on the wall for
drilling, making sure the bracket is level.
Drill holes to a suitable depth and secure the
mounting bracket to the wall with the four
mounting screws supplied. For masonry walls
use the wall plugs with screws provided.
2. Detach the mounting bracket from the back of
the panel heater by pushing down on the top
bracket and then pulling the top brackets out.
The bottom section will then slide down and
out, releasing the mounting bracket.
4. Hang up the heater on the brackets and secure;
Firstly locate the heater onto the lower bracket
and push back to locate and click the upper
brackets into position. Check heater is secure
and plug heater into mains socket.
