Levante LEVFW200, Operation Manual

Page: 3 / 8

3
IMPORTANT: Read these instructions fully before using the heater. Please retain these instructions for future
reference. Make sure that the voltage stated above corresponds with the voltage in your home/office. This
quality product has been tested and certified to meet all applicable UK electrical and safety standards. For
safety reasons, this heater must not be used unless securely fitted to a wall.
We recommend that this product is installed by a qualified Electrician.
REMOVE ALL PACKAGING MATERIALS FROM THIS PRODUCT BEFORE USING IT
Fig. 1
Parts Supplied
Wall mounting Frostwatch heater x 1 Wall plugs x 3 35mm long screws x 3
Before You Start
• Check the pack and make sure you have all of the parts listed
above. If not, contact your Levanté supplier who will be able to
help you.
• This appliance is designed for use as a supplementary heat
source, it is not intended to be the main source of heat.
• This appliance is intended to be wall mounted only.
Assembly Instructions
Important: This appliance is designed only for wall
mounting.
1. Choose position carefully for mounting the appliance, enough
space must be left around appliance. The heater must be
installed at least 60mm above the floor and leave minimum of
300mm of space to ceiling.
See illustration showing in Fig.1 which Zone(s) it is permissible
to install this heater.
NOTE:
DO NOT
install this heater in Zones 0, 1 or 2. Please
install it outside of these zones.
CEILING
ZONE 0
ZONE 1
ZONE 2
2.25m
RECESSED
WINDOW
0.6m
LEVFW200
200W Frostwatch Radiant Heater