6
www.levanteinternational.com.au
www.levanteinternational.co.nz
HOW TO USE THE ELECTRONIC THERMOSTAT
The
Levanté
Electronic
Thermostat is designed to
read the room temperature
every 30 seconds.
This
offers maximum economy,
greater efficiency and is very
simple to use.
1.
Plug the heater into
the GPO and turn
on the GPO switch.
2.
Turn the heater on
by rotating dial
A
from ‘
- Standby’
to ‘ON’
3.
Rotate dial
C
until light
B
illuminates.
4.
Allow time for the room to heat up. This will vary with the size of the room
but usually takes 15-20mins. The light
B
will turn off.
5.
To achieve your comfort level simply adjust the dial
C
to suit. If you
require more heat turn the
C
dial up to a larger
‘DOT’
. If the room is too
hot then turn the dial
C
to a smaller
‘DOT’
.
6.
To return the heater to standby mode, turn dial ‘
A
’ from ‘ON’ to
‘
- Standby’
NOTE:
To turn the heater completely off, turn off the switch at the GPO.
MAINTENANCE
Your Levanté Electric Panel Heater requires very little maintenance. To remove
surface dust use a soft cloth; to remove marks use a damp cloth. Never use
abrasives or metal scourers which could damage the polyester coating. It is
recommended to periodically clean the air vents using the soft brush on your
vacuum cleaner, as dense accumulation of dust will cause the heater to over-heat
and trigger the safety thermal cut-out switch.
