32
FREQUENTLY ASKED QUESTIONS
QUESTION
ANSWER
Can I hear more than one camera at the same
time?
• The monitor will only play sounds from the Active Camera unless you are using Sequence Mode. In Sequence Mode
the sound will play through each camera for 10 second intervals.
Can I use Power Save Mode with more than one
Camera?
• When Power Save Mode is selected it will be enabled for the Active Camera only. If you select Sequence Mode when
Audio Only Mode is enabled, it will apply the setting to each camera as it cycles through the camera at 10 second
intervals.
Why does my Night Vision turn off in the early
morning or during nap times?
• The light levels in the room are too high for the Night Vision sensor on the camera to automatically turn on Night
Vision but are too low for normal/day vision. Try turning Night Vision on manually during these times to see more
clearly.
How do I save the battery life of my monitor?
• Audio Only disables the screen, converting your monitor to an audio monitor. The screen will not turn when sound
is detected by the camera, only the audio will play through the monitor.
• Sleep Mode temporarily shuts off the screen until sound triggers the screen to turn on again. After 20 seconds of
silence, the screen will turn off again.
How can I see more than one camera?
• Select Split or Quad screen to see more than one camera view continuously.
• Sound will only be heard from the Active Camera.
• Select Sequence Mode to cycle through all paired camera at 10 second intervals. Video and sound will play through
the monitor for the camera shown for 10 seconds.
How do I use the Pan/Tilt/Zoom feature?
• From the view screen, press the navigation arrows on the monitor to pan/tilt around the room.
• Access the Camera Select option and choose the camera. Select 2X Zoom on the camera.
