12
Connector Unit MA 30 / MA 31
Leuze electronic
Device Description
Leuze
electronic
Exiting service mode
As soon as
DIP switch 3
is switched back to "Host", the host interface is reac-
tivated.
Data monitoring
When the service interface is in this position, it is possible to "listen" to the
data via the RS 232 as they are transferred from the MA 30/31 to the host
computer (data monitoring). To do this, you must set your PC to the host pro-
tocol as the host interface is only passively decoupled with no change of pro-
tocol.
2.7
Specifications
General Specifications
Interfaces
Power supply
Inputs/outputs
Environmental conditions
Housing
diecast aluminium
Dimensions (WxHxD)
MA 30: 130 x 90 x 93mm
MA 31: 130 x 90 x 55mm
Weight
MA 30: approx. 750g
MA 31: approx. 650g
Protection class
IP 65
Type (optional)
RS 232, with galvanic isolation
RS 422, with galvanic isolation
RS 485, with galvanic isolation
TTY, with galvanic isolation
Service interface
RS 232 internal, 9-pin Sub D plug, male
Operating voltage
18 … 36VDC
Power consumption
without BCL 40/80:
4VA max.
with BCL 40:
9VA max.
with BCL 80:
10VA max.
2 switching inputs
galvanically isolated,with supply voltage terminal for sensors
12 … 36VDC/AC, insulation voltage 500V
2 switching outputs
can be operated galvanically isolated or not isolated, switch-
ing voltage 5 … 48VDC, max. load 500mA
Ambient temp.
(operation/storage)
0°C … +50°C / -20°C … +60°C
Air humidity
max. 90% rel. humidity, non-condensing
Vibration
EN 60068-2-6, Test Fc 0.1 … 5.0g
Shock
EN 60068-2-27, Test Ea 15g/11ms
Continuous shock
EN 60068-2-29, Test Eb 10g/16ms
EMC
EN 50081-1, EN 50082-2, EN 55022
Summary of Contents for multiNet plus Master MA 30
Page 39: ......
