Safety
TNT
35/7-2
4
V
Review state, , Monday, 19. January 2009
Handling the Safety Locking Device:
ª
Observe the permissible environmental conditions for storage and operation
(see chapter 14 "Technical data").
ª
Immediately replace damaged Safety Locking Devices according to these
instructions.
ª
Use cable gland, insulation materials and connecting wires of the appropriate
protection rating.
ª
Protect the Safety Locking Device from penetrating foreign bodies (e.g. shav-
ings, sand and blasting agent).
ª
Before performing painting work, cover the actuation slot, knurled nut and
name plate.
ª
Immediately clean any contamination from the Safety Locking Device that
impacts function according to these instructions.
ª
Make no structural changes to the Safety Locking Device.
2.2
Competent personnel
Prerequisites for competent personnel:
• suitable technical training
• knows the rules and regulations for occupational safety, safety at work and
safety technology and can assess the safety of the machine
• knows the instructions for the Safety Locking Device and the machine
• was instructed by the responsible individuals on the mounting and operation
of the machine and of the Safety Locking Device
2.3
Responsibility for safety
Manufacturer and operator of the machine must ensure that the machine and
implemented Safety Locking Device function properly and that all affected
persons are adequately informed and trained.
The type and content of all imparted information must not lead to unsafe actions
by users.
The manufacturer of the machine is responsible for:
• safe machine construction
• safe implementation of the Safety Locking Device
• imparting all relevant information to the operator
• adhering to all regulations and directives for the safe starting-up of the
machine
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: [email protected]
