Leuze electronic GmbH + Co. KG
In der Braike 1 D-73277 Owen Tel. +49 (0) 7021 573-0
IT 1452g - 01
[email protected] • www.leuze.com
Connecting the IT 1452g to the USB interface (keyboard emulation)
Operating the hand-held scanner in keyboard emulation mode on a USB port is described in this section. With this operating
mode, a PC keyboard is emulated. The read data is written directly into the currently activated program. The data can therefore
be further processed in all standard programs.
Required parts:
1x
IT 1452g 1D-2
1x
50130499
Base for IT 1452 base station
1x
50114525
Power supply unit
1x
50114521
KB USB-1 IT190x (3m, straight)
or
1x
50114523
KB USB-2 IT190x (5m, spiral)
Procedure:
1.
Connect the cable for the base station to a free USB
port.
2.
The scanner acknowledges this connection with a beep.
3.
Scan the adjacent 2D code.
Notice!
To charge the hand-held scanner, the power
supply unit must be plugged in and the hand-
held scanner placed in the base station.
IT 1452g
Hand-held bar code scanner with Bluetooth data transmission
