Starting up the device - Configuration
Leuze electronic
BCL 604i
81
Output data
Table 10.43:
Output data for module 63
Output data length
1 byte
10.11.5Module 64 – Oscillating mirror
Description
Module for supporting the oscillating mirror.
Parameter
Table 10.44:
Parameters for module 64
Parameter length
6 byte
Input data
None
Output data
None
10.11.6Module 65 – Deflection mirror
Description
Module for supporting the deflection mirror.
Parameter
Table 10.45:
Parameters for module 65
Parameter length
2 bytes
Input data
None
Output data
Description
Addr.
Data type
Value range
Init value Unit
Alignment mode
Signal activates and deactivates the alignment
mode for optimum alignment of the device with
the bar code
0.0
Bit
0 -> 1: On
1 -> 0: Off
0
-
Parameter
Description
Addr.
Data type
Value range
Default
Unit
Oscillation mode
This parameter defines the mode in which the
oscillating mirror operates.
0
UNSIGNED8
0: Single oscillation
1: Double oscillation
2: Continuous oscillation
3: Continuous oscillation,
oscillating mirror moves to
the start position at the
end of the reading gate.
2
-
Start position
Start position (opening angle) relative to the
zero position of the swivel range.
1 … 2
SIGNED16
-200 … +200
200
1/10°
Stop position
Stop position (opening angle) relative to the
zero position of the swivel range.
3 … 4
SIGNED16
-200 … +200
-
200
1/10°
Oscillation fre
-
quency
Common value for forward and backward
motion
5
UNSIGNED8
15 … 116
48
°/s
Parameter
Description
Addr.
Data type
Value range
Default
Unit
Deflection angle
Lateral beam exit in degrees relative to the
zero position
0 …1
SIGNED16
-100 … +100
0
1/10°
