Leuze
electronic
Leuze electronic
redCAM
General Manual
19
Example:
Dialog box to save the last changes when creating a new file
IMPORTANT:
When creating a new file, the program is being initialized. Data on the
sensor are not being erased though. Only data structures are relea-
sed, so they may be used again when parameterizing. If you want to
start parameterizing from zero, you will have to initialize the system
explicitly (see chapter). To do so, select
Initialize vision sensor
in the
File
menu.
How to open an existing file
If you have already created files and wish to load an existing one, you can either use
the
Open
button in the tool bar or the respective item of the
File
menu. Use the button
to load a file
or select
Open / load Vision Sensor
in the
File
menu.
This loads the file into the program and passes it on to the vision sensor via serial in-
terface. If the last changes of your current file were not saved, you receive a corre-
sponding message.
- Selection
·
Yes
data are saved in the named file,
·
No
continues without saving the last changes,
·
Cancel
no action is performed.