manualshive.com logo in svg

Leuze electronic ODSL 30 Series, Technical Description, Page: 33 / 71

Share
Download
Leuze electronic ODSL 30 Series Technical Description Download Page 33

Description ODSL 30

Leuze electronic

ODSL 30

31

TNT

 35/7-2

4

V

3.6.2

Switching on

After power-on and error-free initialization of the device, the green LED

PON

 lights up

continuously, the ODSL 30 is measurement mode. The display lighting remains switched
off.

In measurement mode, the LC display shows the current measurement value in millimetres.
If no object is detected or if the signal is too weak, the notice 

NO SIGNAL

 appears on the

display.

Notice

After an operating time of 30 min., the device has reached the operating temperature re-
quired for an optimal measurement and should be referenced then.

3.6.3

Adjustment of the display contrast

While switching the device on, press both arrow keys of the ODSL 30 simultaneously. 

After releasing the keys, you can decrease or increase the contrast of the LC display with
the arrow keys (value range 0 … 255). By pressing ENTER, the adjusted contrast value is
applied and you get to the configuration menu of the ODSL 30.

3.6.4

Reset to factory settings

By pressing ENTER while switching the device on, you can reset the configuration of the
ODSL 30 to the factory settings.

A safety prompt appears.

By pressing ENTER again, all parameters are reset to factory settings. All settings made
previously are permanently lost. By pressing an arrow key, the ODSL 30 returns to measure-
ment operation without resetting the parameters.

Leuze electronic

Dist. [mm]

 10687

contrast: 160

Default Setting?

Press

for OK

Summary of Contents for ODSL 30 Series








































































Reviews:

No comments