General information
6
MA 20
8
i
Le
u
ze electronic
1.3
Description of functions
The MA 208
i
modular interfacing unit is used to connect Leuze devices directly to the
fieldbus.
Bar code reader:
BCL 8, 22, 32, 300i, 500i, 90
2D code reader:
LSIS 122, LSIS 4x2i
Hand-held scanner
ITxxxx, HFU/HFM
RFID read-write devices:
RFM 12, 32, 62 & RFI 32, RFU 61, 81
Bar code positioning system:
BPS 8
Distance measurement device:
AMS 200
Optical distance sensors:
ODSL 9, ODSL 30, ODSL 96B
Measuring light curtain:
KONTURflex to Quattro-RSX/M12
multiNet master connection box:
MA 3x
Additional RS 232 devices:
scales, third-party devices
This is accomplished by transmitting the data from the DEV via an RS 232 (V.24) interface
to the MA 208
i
where a module converts it into the Ethernet TCP/IP format. The data format
on the RS 232 interface corresponds to the Leuze standard data format (9600 bd, 8N1 and
STX, data, CR, LF).
The corresponding Leuze devices are selected using a rotary code switch on the circuit
board of the connector unit. Many additional RS 232 devices can be connected through a
universal position.
