Electrical connection
Leuze electronic
IPS 208i
30
7.1
Overview
The sensor is provided with the following connections:
• PWR / SWIO: A-coded, 12-pin, M12 connection for operating voltage, switching inputs/outputs
• HOST: D-coded, 4-pin, M12 connection for the Ethernet connection
PWR / SWIO
HOST
1
2
1
PWR / SWIO, M12 plug, 12-pin, A-coded
2
HOST, M12 socket, 4-pin, D-coded
Fig. 7.1:
Electrical connections
NOTICE
Ready-made cables are available for all connections (see chapter 15.4 "Cables accessories").
Voltage supply and switching inputs/outputs
The voltage supply (18 V … 30 V DC) is connected at the PWR / SWIO M12 plug.
Eight freely programmable switching inputs/outputs for individual adaptation to the respective application
are also available on the PWR / SWIO M12 plug.
Standalone operation in Ethernet network
The sensor is operated as a "stand-alone" single device in an Ethernet star topology with individual IP ad-
dress. The host interface of the superior system is connected to the HOST M12 socket.
