Short description HFU 4500D
Leuze
electronic
Page 18
HFU 4500D with USB (COM-Port-Emulation)
To use the HFU45xxD with USB you use the standard RS232 cable and connect the
USB Converter cable. The data is sent to the new COM-Port. The necessary driver is available on
www.leuze.de
. the interface is set to 9600,8,N,1.Separate power supply needed.
Necessary parts:
1x
50113280
HFU4500D, incl. RS232 -cable
1x
50110676
NT Hx5x0, Power supply (100- 240VAC/6VDC)
1x
50110677
KB-USB-RS232, converter cable, 1m length
USB-converter cable KB-RS232-USB, Length 1m
Art-No. 50110677
Pinning of the USB-connector, 9 pin Sub-d like above
Note: Operation with external power supply recommended
USB-Type A-Plug
Signal
Description
1
VCC IN
5 VDC
2
Data -
Data -
3
Data -
Data +
4
GND
Signal Ground
Triggering /Activation
For starting the SCAN operation / activation signal (trigger) you use the Trigger button at the handle of the
device.
