Leuze electronic AMS 200, Technical Description, Page: 48 / 118

Device parameters and interfaces
44 AMS 200 Leuze electronic
M9
page 60
Error handling
procedures
(P) Position value in case of error
(P) Position error message delay ON/OFF
(P) Position error message delay
(P) Velocity value in case of error
(P) Velocity error message delay ON/OFF
(P) Velocity error message delay
M10
page 62
Velocity
(I) Velocity value
(P) Velocity value resolution
(P) Velocity integration time
M11
page 64
Velocity
Limit value 1
(P) Monitoring for over/under values
(P) Monitoring direction dependent yes/no
(P) Velocity limit value 1
(P) Hysteresis of velocity limit value
(P) Start of velocity monitoring range
(P) End of velocity monitoring range
M12
page 66
Velocity
Limit value 2
(P) Monitoring for over/under values
(P) Monitoring direction dependent yes/no
(P) Velocity limit value 2
(P) Hysteresis of velocity limit value
(P) Start of velocity monitoring range
(P) End of velocity monitoring range
M1 3
page 68
Velocity
Limit value 3
(P) Monitoring for over/under values
(P) Monitoring direction dependent yes/no
(P) Velocity limit value
3
(P) Hysteresis of velocity limit value
(P) Start of velocity monitoring range
(P) End of velocity monitoring range
M14
page 70
Velocity
Limit value 4
(P) Monitoring for over/under values
(P) Monitoring direction dependent yes/no
(P) Velocity limit value 4
(P) Hysteresis of velocity limit value
(P) Start of velocity monitoring range
(P) End of velocity monitoring range
M15
page 72
Velocity
Limit value
Dynamic
(O) Release/lock limit value control
(P) Monitoring for over/under values
(P) Monitoring direction dependent yes/no
(O) Dynamic velocity limit value
(O) Hysteresis of velocity limit value
(O) Start of velocity monitoring range
(O) End of velocity monitoring range
M16
page 7 3
Velocity status (I) Status of velocity monitoring
M17
page 75
SSI interface
(P) Gray/Binary coding
(P) Number of data bits
(P) Resolution
(P) Update rate
(P) Function of the error bit