PicSight GigE Getting Started Guide, version 1.96.169.1
24
The MTU settings is here available under the
Jumbo Frames
option, with a
possibility to select from predefined values.
On the
PicSight
side
the MTU settings is available in the HTTP based
configuration, in the
Change Other INI Items
page after successful login.
The number set here should be the same as on the PC side.
4.4.4.
Setting the Streaming Packet Size
The desired streaming packet size can be set on the host side in the
leutron.ini
file, Section LvGvp:
[LvGvp]
DefGvspPktSize=1400
Note that this size has to be always
at least by 50 bytes smaller
than the
MTU setting.
4.4.5.
Setting the Inter-Packet Delay
You can increase the inter-packet delay by setting the entry in the
leutron.ini
on the host side:
[LvGvp]
InterPktDelay=xxx
