Leupold RCX Trail Camera System User Manual Download Page 6

10

11

1.  Install an SD card. An SD card from 

another device may already contain 
files that will reduce the number of 
photos you can take. To optimize the 
operation of the camera’s SD card, 
format it using the controller. This 
can be done in the controller setup 
menu and by selecting “Format SD 
Card” from the bottom of the menu. 
This will erase all SD Card contents. 
Once the SD card is formatted, 
insert it into the camera.

2.  Open the access door and remove 

the AA battery cartridge.

3.  Insert 8 batteries with the negative 

(flat) end against the contact spring. 

4.  Insert the loaded battery cartridge 

into the camera with the contact 
side going in first until the catch 
snaps into place. Be sure to close 
the bottom door securely after all 
setup is complete to ensure good 
contact pressure.

5.  Turn power on (“I” position). The 

camera won’t take pictures for 30 
seconds after powered on or with 
the USB cable still connected to 
both the controller and the camera.

6.  Connect the controller to the 

camera with the USB cable. Allow 
several seconds for the controller 
to recognize the camera. When 
properly connected, the controller 
will show a camera status box at the 
bottom of the screen.

• 

Ideally, use only Energizer

®

 Ultimate 

Lithium AA batteries or the RCX 
Rechargeable Battery Pack, 
especially for cold weather use and 
night time photos & video. Alkaline 
batteries are adversely affected by 

freezing temperatures, and high 
power drain applications, regardless 
of what device they are used in.

• 

Never mix battery types (Alkaline, 
Ni-MH, Lithium) or mAh rating.

• 

Never try to recharge a battery that 
is not labeled as rechargeable.

• 

Use only the recommended charger 
for rechargeable batteries.

• 

Always replace all batteries at the 
same time.

• 

Do not attempt to use only 4 
batteries. 8 batteries are required 
for the RCX cameras to function.

• 

Follow the battery manufacturer’s 
recommendations for storage, 
handling and disposal.

Camera Setup

;;;;;;;; 

3RZHU6DYHU0RGH

5&;&DPHUD,QIR

%UDG

6HWXS&DPHUD

Camera Status

Battery Guideline

Summary of Contents for RCX Trail Camera System


















Reviews: