24
TO INPUT THE TEMPERATURE AND ALTITUDE AT WHICH THE STRIKING DISTANCE FOR EACH CLUB
WAS MEASURED:
The procedure for inputting the temperature and altitude at which each striking distance
was measured begins immediately after inputting the specific
club distances . Follow each of the steps under “To Input The
Striking Distance Of The 8, 6 and 4-iron” . Once the striking
distances have been input, press MODE and follow the
steps below:
1) The last saved temperature will be flashing in
the bottom portion of the display . If you wish to
input a temperature other than the one shown, proceed
to step 2 . To save the shown temperature, press MODE and skip to step 3 below .
2) Press and release POWER to begin incrementing through the temperature settings .
The default setting is 75 degrees F . Pressing POWER will increment through a range
of 30 degrees to 120 degrees F in 5 degree increments . When the appropriate tem
perature is displayed, press and release MODE to save your selection and move on to
the altitude input .
in
cm
M
Y
ft
LOS
C
LU
B
T G R
Summary of Contents for GX-1i3
Page 1: ...GX 1i3 AND GX 2i3 RANGEFINDERS OPERATING INSTRUCTIONS...
Page 2: ......
Page 36: ...Part 172462 Artwork 172494C...
