17
TO INPUT THE CURRENT TEMPERATURE AND ALTITUDE: (dP)
1) Press POWER to activate the rangefinder .
2) Press and hold MODE for at least 2 seconds to enter the Quick Set Menu .
3) Verify that TGR is turned on; if TGR is not activated, you will not be able
to enter the current temperature . To activate TGR, see “To Activate TGR”
(page 15) .
4) Press and release MODE again; the last saved temperature will be
flashing in the lower portion of the display .
5) While the temperature is flashing, press and release POWER to change
the current temperature setting to match the current conditions . Each
depression of POWER will increase the temperature setting by 5 degrees
until 120 degrees F has been reached, at which time the setting will
return to 30 degrees F and begin increasing again . Press MODE to save
the changes .
6) Press and release MODE again and the last saved current altitude will be
flashing .
Summary of Contents for GX-1i3
Page 1: ...GX 1i3 AND GX 2i3 RANGEFINDERS OPERATING INSTRUCTIONS...
Page 2: ......
Page 36: ...Part 172462 Artwork 172494C...
