Leupold GX 1i, Operating Instructions Manual

Page: 25 / 52

22
3) Verify that TGR is turned on; if TGR is not activated, you will not be able
to enter the current temperature or altitude . To activate TGR, see “How
do I activate TGR?” (page 17) .
4) Press and release Mode; the last saved current temperature will now
be flashing . Press and release MODe again and the last saved current
altitude will be flashing .
5) While the altitude is flashing, press and release POWeR to change the
current altitude setting to match current conditions; each depression of
POWeR will increase the altitude setting by 500 feet until 9999 has been
reached, at which time the setting will return to 0 and begin increasing
again .
6) To save the changes and return to ranging mode, let the unit sit idle
for at least 20 seconds until an automatic power-down occurs, or simply
press and hold MODe for at least 1 second . To continue through the
Quick Set Menu and manipulate another feature, press and release
MODe until the appropriate icon is displayed .