The small pipe extender and coupler (received in
the Glow Rings box) should be placed at the top of
the pipe stack, closest to the diffuser.
Note: Pipe
extensions and couplers are only needed for 24-, 30-
and 36-plant Farmstands. 36-plant Farmstands will
need two pipe extensions and two couplers.
Locate the water diffuser and place it on top of the
pipe as pictured in the diagram to the right. Then,
place the Farmstand lid on the top Glow Ring and
lock it into place.
After the Glow Rings are assembled, run the power
supply cord through the second hole in the fill port
gasket. If there is a temporary plug in that hole you
will need to remove it.
When you lock the gasket into
place make sure there is enough slack so that the
power supply cord drops down into the Farmstand’s
tank before it goes back up and connects to the
fi
rst
Glow Ring, as shown in the graphic to the right.
Note: To prevent damage or malfunction, never
drape anything over or hang items on Glow Rings.
06
ASSEMBLING YOUR
GLOW RINGS
7
8
Diffuser
Pipe Coupler
Glow Ring™
Pipe Extension
Pump
Power Supply
Gasket
Cord Slack
9
If the gasket that came with your Farmstand does not have two
holes, visit lettucegrow.com/contact-us for a replacement.
Need help? Call or text (512) 234-4001
Summary of Contents for GROW RINGS
Page 1: ...GLOW RINGS ASSEMBLY GUIDE ...
