Let's Go Aero Fly Rod Adapter Kit Quick Start Manual Download Page 5

Page 5 of 5

Do not exceed the 50lbs weigh limit of the Fly Rod Adapter Bars (25 lbs weight limit for each Fly Rod Adapter) and 

the separate 120 lbs overal weight limit of the V-Wings. Failure to follow weigh limits may result in damage to carrier, 

damage to property, bodily injury or death.

Always check and confirm all truck tie-down locations, cam buckles and webbing straps are tight and fully secured 

before each transit. Failure to follow proper installation and equipment checks before transit may result in damage 

to carrier, damage to property, bodily injury or death.

      WARNING:

 

      WARNING:

 

To register your product, visit the LetsGoAero.com/registration

Technical Support

For assistance with this product, please contact us:

Let’s Go Aero, Inc.

5353 N. Union Blvd. Suite 103

Colorado Springs, CO 80918 USA

Phone: 877-464-2376 or 719-630-3800

Email: [email protected]

To learn more about our products and stay informed about useful options for transporting all kinds of gear with your 

carrier, be sure to visit our website: www.LetsGoAero.com

Patent and trademark protected:

Patent Numbers 8,889,456; 14/546.993; Patents Pending

Copyright© 2021, Lets Go Aero, Inc., All rights reserved.

WEIGH LIMITATIONS EXPLAINED

   

The Fly Rod Cradles have a 25 lbs weight limit each for a combined 50 lbs. Accessories attached to the Fly Rod Cradles 

may not exceed 50 lbs. [Fg. 20]

The Tie-offs included in this kit increase the overall weight limit of the V-Wing to a combined 120 lbs. 

EXAMPLE:

 Users 

MAY

 carry a 50 lbs Rod Vault attached to the Fly Rod Cradles 

[A] 

and also carry two bikes at 35 lbs 

each on the V-Wing. 

EXAMPLE:

 Users 

MAY

 

NOT

 carry a 60 lbs roof top cargo carrier attached to the Fly Rod Cradles 

[A].

[Fg. 20]

A

50 LBS 

120 LBS 

Summary of Contents for Fly Rod Adapter Kit






Reviews: