Page 7 of 7
LEG EXTENSION:
With all four Landing Gear Legs [
A
] in the Deployed
position, press down on the Extension Levers located on each Leg [
A
]
working with each bonded set in tandem to release the wheel extensions
[Figure 32].
Slide each Leg [
A
] downward until they reach the ground.
LEG RETRACTION:
Press down and hold the Extension Levers to release
the wheel extensions [Figure 14].
Grabbing from the bottom of each wheel, push the Landing Gear Legs up
towards the carrier until desired Leg length is reached or the Legs become
fully retracted and release the extension.
EXTENSION & RETRACTION
EXTENSION
LEVER
[Figure 32]
Landing Gear wheels may be deployed on
smooth & level
surfaces
only. Failure to adhere to product guidelines may void warranty.
NOTICE:
A
SAFE USE OPERATION
The Landing Gear accessory’s
maximum payload weight is 300 lbs
(available cargo weight). Do not exceed this
carrying capacity.
Landing Gear may only be used on smooth & level surfaces.
Landing Gear weighs 40 lbs. Do not exceed the receiver hitch manufacturer’s tongue weight rating.
Do not use this accessory for purposes other than those for which they were designed. Failure to follow the guidelines of
the product’s instructions will void the warranty.
NEVER EXCEED LANDING GEAR PAYLOAD CAPACITY OR BEGIN TRANSPORT WITHOUT THE LANDING
GEAR FULLY ENGAGED IN THE NESTED POSITION. LANDING GEAR WHEEL MAY ONLY BE DEPLOYED ON
SMOOTH, LEVEL SURFACES. ALWAYS CHECK AND SECURE ALL CONNECTIONS BEFORE TRANSIT.
WARNING:
Let’s Go Aero 1 Year Limited Warranty
For information and to register on line at www.LetsGoAero.com/warranty
WARRANTY:
Copyright
©2022
, Lets Go Aero, Inc., All rights reserved.
