Page 4 of 7
STEP 5
STEP 6
Using the Legs [
A
] that face away from the vehicle, remove one bolt and
associated hardware from each L eg [Figure 13].
NOTE:
Remove the bolt that is located
furthest away
from the vehicle
on the
interior of the carrier
as shown [Figure 12].
Attach the Long Support Bar
[D]
to the Legs using one (1) 1/4
x 3/4in Bolt
[N]
, two (2) 1/4in Washers
[M]
, and one (1) Short
Nylock Nut
[O]
on
each side as shown
[Figure 14 & 15].
[Figure 15]
[Figure 13]
SHOWN WITHOUT FLOOR
PANELS FOR CLARITY
SHOWN WITHOUT CARRIER
FLOOR PANELS FOR CLARITY
[Figure 12]
A
[Figure 14]
TOOLS REQUIRED: 9/16IN SOCKET & WRENCH
TOOLS REQUIRED: 9/16IN SOCKET & WRENCH
A
D
D
N
O
M
M
A
STEP 7
Following the same
procedure as Step
9 using the Legs [
A
]
that face towards the
vehicle, remove two
(2) existing Leg Bolts
located closest to
the vehicle and the
associated Hardware
from each leg.
Re-attach the hardware
installing the Short
Support Bar [
C
] as
shown
[Figure 19 & 20].
SHOWN WITHOUT CARRIER FOR CLARITY
[Figure 17]
[Figure 16]
TOOLS REQUIRED: 9/16IN SOCKET & WRENCH, 7/16IN SOCKET & WRENCH,
LEG
HARDWARE
LEG
HARDWARE
LEG BOLT
LEG BOLT
A
A
C
C
