Local Navigator Bluetooth Base Station
lesswire AG
Page 9
Image 3.3 – Configuration via HTML (default settings)
„Product Information“ lists some information about hardware and software versions of
the device and of the include Bluetooth module. Serial number, Bluetooth device
address and Ethernet address are also listed.
The following IP addresses can be edited manually. These inputs can be changed
back by the Undo button of the browser.
When the configuration is finished, a click on the Submit/Restart button will transfer
the data to the Base Station. The device will then perform a restart and the new
parameters will be used.
A red status line in the upper view is showing the actual status of the configuration. If
any bad value is entered and the Submit/Restart button is clicked, the status line will
show the text ‘Bad values!’. Erroneous values will never be transmitted to the Base
Station. All entered values can then be checked again, updated and transferred
again.
