Local Navigator Bluetooth Base Station
lesswire AG
Page 10
Important notice:
Before clicking on Submit/Resume, check all entered values for
correctness and validity, especially the setup of the IP address
for the Base Station and the gateway IP address and the
subnet mask need to be verified thoroughly. It is a must to
ensure, that the default gateway IP address and the IP
address for the Base Station have the same address range!
The Local Navigator Bluetooth Base Station can only be accessed by an internet
browser, when the configured IP address is known. This setting should therefore be
indicated on the Base Station, e.g. by an appropriate label.
3.4
PPP Server Configuration
The PPP server settings are used to define the address area for the Bluetooth
clients.
The first value (see Image 3.4: 172.16.200.52) is always the IP address of the Base
Station as seen from the client side. All other addresses can be assigned to
Bluetooth clients. These clients can then setup connections to the Base Station.
All Bluetooth connections which are setup by the clients, can be secured by a
username / password inquiry, which will be performed before setup of a new
connection. If no username and password is defined, any connection can de started
without any user inquiry.
Image 3.4 - Example: PPP Server Settings
