INPUT: The input jack is a STEREO ¼” Tip-Ring-Sleeve jack. It will also accept
standard Mono ¼” cables. When a MONO cable is being used, the Leslie Pedal
will convert the Leslie effected signal into a Stereo output. If you use a Stereo
“Insert Cable” adapter (Male TRS ¼” plug to dual mono ¼” jacks) you can run any
stereo input into the pedal.
POWER 9 VDC: Connect the provided Power Adapter here. Very few AC
adapters are suitable for use with this Leslie Pedal. They are underpowered, and
may damage your pedal. Please USE ONLY the Power Adapter provided.
CU-1 INPUT: This TRS (Tip-Ring-Sleeve) jack accepts the HAMMOND CU-1
traditional “Half Moon” Leslie Speed Switch.
LEFT/RIGHT OUTPUTS: ¼” Jacks with Line-Level Output. Stereo use is
encouraged for best and most accurate results, but if Mono output is needed,
use the LEFT output. NOTE: If you are connected with a MONO cable, the Leslie
Effect will be output in Stereo, but in BYPASS mode, only the Left Channel will be
output.
1.
2.
3.
4.
connections
tHe LesLie PeDaL 5
