MIX: This controls the balance between the Treble (Upper) and Bass (Lower)
Virtual Rotors. -5 favors the Bass and +5 Favors the Treble. Center Position is
equal volume.
LEVEL: Controls the level of the Leslie effect, relative to the bypass level.
BYPASS (FOOTSWITCH): True bypass circuitry directly hardwires the input
to output when bypassed to avoid any loss of fidelity, and engages the effect at
the press of a switch. NOTE: If you are connected with a MONO cable (like a
guitar), the Leslie Effect will be output in Stereo, but in BYPASS mode, only the
Left Channel will be output. A 1/4” mono female to stereo male adapter cable is
available through Hammond USA, which distributes the signal evenly to both sides
of the Stereo input. When the pedal is in BYPASS mode, left_in goes to left_out
and right_in goes to right_out. No bleeding or cross-connections (it is a hard
wired, true bypass). Red LED is lit when BYPASS is engaged.
9.
10.
11.
10 HammonD Usa
controLs
