background image

- 10 -

3. Remove the dust particles from the

exhaust filter 

.

Notice:

Should the exhaust filter 

be heavily soiled, rinse it thoroughly
under clean running water. Afterwards
allow it to dry out ( ca. 15 hours at
room temperature). Replace it only
when it is completely dry.

4. Replace the exhaust filter 

and the

grill 

.

5. Slide both of the lugs 

of the exhaust

filter cover 

e

into the recesses on the

vacuum cleaner.

6. Press the exhaust filter cover 

e

to

until it audibly engages.

Cleaning and care

Attention!

Before cleaning the

appliance, remove the plug 

o

from

the power socket. Risk of electric
shock! 

Clean the housing with a lightly moistened
cloth. Do not use abrasive or aggressive
cleaning materials. These could damage
the upper surfaces.

Take note of the chapter "Filters" for
the cleaning of the filters.

Disposal

Do not dispose of the appliance in
your normal domestic waste.

Dispose of the appliance through an
approved disposal centre or at your 
community waste facility.
Observe the currently applicable regula-
tions. In case of doubt, please contact
your waste disposal centre.

Dispose of the packaging materials
in an environmentally responsible
manner.

Warranty and Service 

The warranty conditions and the service
address can be found on the warranty
slip.

Importer

KOMPERNASS GMBH
BURGSTRASSE 21
D-44867 BOCHUM

www.kompernass.com

IB_KH1410_E3325_UK.qxd  11.07.2007  14:20 Uhr  Seite 10

Summary of Contents for LERVIA KH 1410














Reviews: