background image

VARMECA

3

Throughout the manual, this
symbol warns of consequences

which may arise from inappropriate use
of the VARMECA, since electrical risks
may lead to material or physical damage
as well as constituting a fire hazard. 

1 - General
Depending on their degree of protection,
VARMECA motors may contain moving
parts, as well as hot surfaces, during
operation.
Unjustified removal of protections, incorrect
use, faulty installation or inappropriate
operation could represent a serious risk to
personnel, animals and equipment.
For further information, consult the manual.
 All work relating to transportation, installa-
tion, commissioning and maintenance
must be performed by experienced quali-
fied personnel (see IEC 364 or CENELEC
HD 384, or DIN VDE 0100 and national
specifications for installation and accident
prevention).
In these basic safety instructions, qualified
personnel means persons competent to
install, mount, commission and operate
the product and possessing the relevant
qualifications. 

2 - Use
VARMECA motors are components
designed for integration in installations or
electrical machines.
When integrated in a machine, commiss-
ioning must not take place until it has
been  verified that the machine conforms
with directive 89/392/EEC (Machinery
Directive).
It is also necessary to comply with standard
EN 60204, which stipulates in particular
that electrical actuators (which include
VARMECA) cannot be regarded as circuit-
breaking devices and certainly not as
isolating switches.
Commissioning can take place only if the
requirements of the Electromagnetic
Compatibility Directive (EEC/89/336,
modified by EEC 92/31) are met.
VARMECA motors meet the requirements
of the Low Voltage Directive 73/23/EEC,
modified by 93/68/EEC. The harmonised
standards of the DIN VDE 0160 series in
connection with standard VDE 0660, part
500 and EN 60146/VDE 0558 are also
applicable.
The technical characteristics and instructions
concerning the connection conditions
specified on the nameplate and in the
documentation provided must be observed
without fail.

3 - Transportation, storage
All instructions concerning transportation,
storage and correct handling must be
observed.
The climatic conditions specified in the
technical manual must be observed.

SAFETY AND OPERATING INSTRUCTIONS FOR ELECTRICAL
ACTUATORS (In accordance with the low voltage directive 73/23/EEC
modified by 93/68/EEC)

Summary of Contents for Varmeca LS 100





















Reviews: