Leroy-Somer DIGIDRIVE SK Series, Technical Data Manual, Page: 32 / 34

Technical
data
Derating curves
and losses
Drive voltage
levels
DC bus
design
Mechanical
installation
EMC filters Line chokes
Motor cable
lengths
General
data
I/O
specification
Supply
types
Options
32
Digidrive SK Technical Data
www.leroy-somer.com Issue Number: a
12.1 Top cover kit
The Top Cover kit will comprise of a top cover which will clip to the top of the drives plastic housing. This Top Cover will stop falling dirt or debris from
entering the electronics through the ventilation slots on the top of the drive. This will allow the top of the drive comply with the requirements of IP4X.
12.2 UL Type 1 Kit
The UL Type 1 kit will allow the drive to comply with the requirements of UL Type 1.
The UL Type 1 Kit will comprise of the following parts:
Digidrive SK Size A
• 1 x Conduit entry kit
• 1 x Top Cover
• 1 x Side Cover
Digidrive SK Size B
• 1 x Conduit entry kit
• 1 x Top Cover
• 4 x Side Cover
Digidrive SK size C
• 1 x Conduit entry kit
• 1 x Top Cover
• 5 x Side Cover
EMC
EMC Filters
These additional filters are designed to operate
together with the drive’s own integral EMC filter
in areas of sensitive equipment
No
AC input line
reactors
To reduce supply harmonics
Cable
management
SK-Bracket Cable management bracket
UL type 1 kit
Bottom metal gland plate, top cover and side
covers to allow the drive to comply with the
requirements of UL type 1
No
Top cover Top cover kit
The additional top cover kit will increase the
environmental protection of the top face to IP4X
in vertical direction.
No
Communications
CT Comms cable
Cable with isolation RS232 to RS485 converter.
For connecting PC/Laptop to the drive when
using LS Soft or SyPTLite
Yes
LS Soft
Software for PC or Laptop which allows the user
to commission and store parameter settings
01.04.00 Yes
SyPTLite
Software for PC or Laptop which allows the user
to program PLC functions within the drive
02.00.07 Yes
Braking
resistors
- Braking resistors - -
When the Top Cover is fitted, the drive must still be mounted in a location which prevents access except by trained and authorised
personnel, and which prevents the ingress of harmful contamination. It is designed for use in an environment classified as pollution
degree 2 in accordance with IEC 60664-1. This means only dry, non-conducting contamination is acceptable.
Type Option Colour Name Further details
Minimum
option
firmware
version
Unidrive SP
compatible
?
L1
L P
H
2,5mm 2
Ø 4,8
H1
L2
WARNING