3
IMPORTANT SAFEGUARDS
The following safety precautions apply when using electrical appliances:
1. Read all instructions.
2. To protect against electrical shock do not immerse cord, plugs,
portable appliances or milling unit in water or other liquid.
3. Close supervision is necessary when any appliance is used by or
near children.
4. Remove plug from outlet when the appliance is not in use, before
putting on/taking off parts and before cleaning.
5. Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions or is dropped or damaged in any
manner. Return appliance to the nearest authorized service facility
for examination, repair, or electrical or mechanical adjustment.
6. The use of accessory attachments not recommended by the
appliance manufacturer may cause injuries.
7. Do not use outdoors.
8. Do not let cord hang over edge of table or counter or touch hot
surfaces.
9. Do not place on or near a hot gas or electric burner or in a heated
oven.
10. Do not use appliance for other than intended use.
11. Avoid contacting moving parts.
12. Save these instructions.
NUTRIMILL SAFETY INSTRUCTIONS
1. Always be sure the separator cup is properly attached before
milling.
2. Always check your grain for foreign objects before milling. Do not
use grain that has not been cleaned. We recommend purchasing
and using grain from a reliable source.
3. Do not over-fill the hopper, it is easy to empty the flour canister and
continue milling.
4. Do not mill damp or wet grains.
5. Always clean the filter after milling by tapping out excess flour.
6. All service and repairs must be done by an authorized service
center. For service information, see the warranty on the last page of
this manual.
