Pulp Ejection
M
INI
J
UICER
6
DISASSEMBLY
Always make sure the juicer is unplugged before beginning disassembly.
1. Remove the clamps by bracing each thumb on the top or middle of each
clamp.
2. Use one or two fi ngers to pull
out the bottom of each clamp.
Let the clamps hang from the
sides by the lower hinges.
3. Lift up the transparent cover
from the juicer.
4. Lift off the juice bowl and
blade/basket together. These
two pieces separate easily for
cleaning.
CLEANING
All parts are washable in warm soapy water except the motor base.
• Use any liquid dish washing detergent. Do not use any products containing
ammonia, bleach or scouring powders. These products will dull, scratch or
mar the plastic surface.
• Disassemble according to instructions.
• To clean the cover and juice bowl, use a soft sponge or dish cloth. To
clean the blade/basket, invert the basket assembly under a faucet so water
passes through the outside to the inside. Use a scotch pad or soft brush to
clean pulp from the basket.
• Wipe the motor base with a damp cloth.
• After prolonged use, the cover, blade/basket assembly, juice bowl and
plunger may start to show mineral deposits. To remove deposits, submerge
in a solution containing ½ cup of automatic dish washing detergent and a
sink full of water overnight. Then rinse thoroughly.
• For convenience, all parts, excluding the motor base are also dishwasher
safe, on top rack only.
• All other servicing should be performed by authorized service personnel
only.
Disassembly
Transparent
Cover
Plunger
Juice
Bowl
Blade Basket
Clamp
Pulp Collector
Motor Base
Juicing Spout
7
JUICING TIPS
• For the best results while juicing fruits and vegetables, press slowly and
fi rmly on food plunger at a steady rate.
• Trimming stalks and stems off of produce is recommended. It will make
juice less bitter.
• When juicing a combination of fruits or vegetables, feed the machine slowly
between combinations of fruits or vegetables.
• Always try to select fresh, fi rm produce and wash well before using.
• When juicing leafy greens, roll tightly before putting into feeding tube.
• Juice from fruits and vegetables should be consumed immediately after
juicing, before oxidation occurs.
• For better health, drink at least two or three glasses of fresh juice daily.
• Before juicing, place a glass or container under the juicing spout.
Juicing Tips - Trouble Shooting
TROUBLE SHOOTING
Q. Juicer will not turn on.
A. Disassemble the juicer and reassemble. Sometimes the unit will not engage
the safety switch allowing the juicer to turn on. If the problem continues,
contact the L’EQUIP Service Department.
Q. Pulp is much wetter than it used to be.
A. The dampness of the pulp will vary depending on the saturation content of
the product being juiced. Saturation may vary depending on time of year
and other factors.
Blade basket may be getting dull. If the blade basket has become dull, it will
need to be replaced. The blade basket has a 3 year warranty.
Pulp Ejection
M
INI
J
UICER
6
DISASSEMBLY
Always make sure the juicer is unplugged before beginning disassembly.
1. Remove the clamps by bracing each thumb on the top or middle of each
clamp.
2. Use one or two fi ngers to pull
out the bottom of each clamp.
Let the clamps hang from the
sides by the lower hinges.
3. Lift up the transparent cover
from the juicer.
4. Lift off the juice bowl and
blade/basket together. These
two pieces separate easily for
cleaning.
CLEANING
All parts are washable in warm soapy water except the motor base.
• Use any liquid dish washing detergent. Do not use any products containing
ammonia, bleach or scouring powders. These products will dull, scratch or
mar the plastic surface.
• Disassemble according to instructions.
• To clean the cover and juice bowl, use a soft sponge or dish cloth. To
clean the blade/basket, invert the basket assembly under a faucet so water
passes through the outside to the inside. Use a scotch pad or soft brush to
clean pulp from the basket.
• Wipe the motor base with a damp cloth.
• After prolonged use, the cover, blade/basket assembly, juice bowl and
plunger may start to show mineral deposits. To remove deposits, submerge
in a solution containing ½ cup of automatic dish washing detergent and a
sink full of water overnight. Then rinse thoroughly.
• For convenience, all parts, excluding the motor base are also dishwasher
safe, on top rack only.
• All other servicing should be performed by authorized service personnel
only.
Disassembly
Transparent
Cover
Plunger
Juice
Bowl
Blade Basket
Clamp
Pulp Collector
Motor Base
Juicing Spout
7
JUICING TIPS
• For the best results while juicing fruits and vegetables, press slowly and
fi rmly on food plunger at a steady rate.
• Trimming stalks and stems off of produce is recommended. It will make
juice less bitter.
• When juicing a combination of fruits or vegetables, feed the machine slowly
between combinations of fruits or vegetables.
• Always try to select fresh, fi rm produce and wash well before using.
• When juicing leafy greens, roll tightly before putting into feeding tube.
• Juice from fruits and vegetables should be consumed immediately after
juicing, before oxidation occurs.
• For better health, drink at least two or three glasses of fresh juice daily.
• Before juicing, place a glass or container under the juicing spout.
Juicing Tips - Trouble Shooting
TROUBLE SHOOTING
Q. Juicer will not turn on.
A. Disassemble the juicer and reassemble. Sometimes the unit will not engage
the safety switch allowing the juicer to turn on. If the problem continues,
contact the L’EQUIP Service Department.
Q. Pulp is much wetter than it used to be.
A. The dampness of the pulp will vary depending on the saturation content of
the product being juiced. Saturation may vary depending on time of year
and other factors.
Blade basket may be getting dull. If the blade basket has become dull, it will
need to be replaced. The blade basket has a 3 year warranty.
