LPC 48 / 96 Users Manual
Page 56
6.6 Cue Properties
Cue fades are handled with three front panel buttons:
Go
- Starts the fade to the next cue
Hold
- Stops the fade. Press 'Go' to resume.
Back
- Reverses a fade that is in progress
For automatically timed cross fades, press the
Go
button. The cues will fade up
and down according to the fade times associated with the cue.
6.7 Taking Control with the Manual Crossfader
After cues have been played back with the
Go
button, the manual fader can be
used to advance the cue stack. This requires pressing the
Hold
key to stop
further timed fades.
1.
Press
Hold
. An indicator will appear on screen that cue playback is on
Hold.
2.
Move the
Manual Crossfader
to the bottom position, then to the top to
match the level of the completed fade. The Hold indicator will turn off, and
the word ‘
Manual’
at the top of the Cue Run screen will change to a bold
font.
3.
Move the
Manual Crossfader
from the top position to the bottom position
to change to the next cue.
Summary of Contents for LPC 48
