Page 2 of 5
Step 3 -
Hang the
luminaire on top bolt
.
Step 4 -
Align bottom holes
in the luminaire and back
plate with closest hole
in the pole, install lower
bolt, and tighten upper nut/
washer and lower bolt.
Step 5 -
Connect grounding
wire to grounding screw.
B
B
E
F
E
F
Arieta LED Area Light - AR13/AR18 Series
Installation Guide
Step 6 - Adjust Drive Current
Drive current should comply with designed illumination levels and circuit
loading. Consult with design engineer before changing. If a new drive current
is required, open the connector and change the connection according to the
current selector diagram installed in the fixture. Note: If the FDC option or CR
option was ordered, the drive current cannot be changed.
D
Step 1 -
Install the
back plate
inside the pole with
top bolt.
Install nut/washer
near end of bolt.
A
Standard Luminaire Installation
A
Step 2 -
Open the power door.
B
B
C
© 2019 Leotek Electronics USA LLC
AR13-18_Installation_Guide_N-Series_02-13-19
• Arieta’s universal mount is ideal for retrofit applications
• For new installations, see page 5 for drilling dimensions
• See page 4 for Wall Mount installation
C
D
