7
Cabling
Use the four twisted-pair, category 5e, or the above cabling for RJ-45 port connections. The cable
between the switch and the link partner (switch, hub, workstation, etc.) must be less than 100
meters (328 ft.) long.
The small form-factor pluggable (SFP) is a compact optical transceiver used in optical
communications for both telecommunication and data communication applications.
Caution:
Please employ optional optical transceiver (SFP/Fixed Fiber) that complies with
IEC 60825-1 and classified as Class 1 laser product.
Attention:
Veuillez utiliser un émetteur-récepteur optique (SFP) conforme à la norme CEI
60825-1 et classé comme produit laser de classe 1.
To connect the transceiver and LC cable, please follow below steps:
Step 1
Insert the SFP transceiver module into the SFP slot as shown below in Figure 2.4. Notice
that the triangle mark is at the bottom of the SFP slot. Figure 2.5 shows SFP transceiver
module was inserted.
Figure 2.4: Transceiver to the SFP Module
Figure 2.5: Transceiver Inserted
Step 2
Insert the fiber cable of the LC connector into the transceiver as shown below in Figure
2.6.
