LMS
Operating
Manual
Page
7
Edit contact link:
Requires the List User Name and List Password for access.
Allows specification of up to 8 email contact addresses.
Protonode Option
If the Protonode option has been installed with the alarm unit, please contact Leonard Valve for complete
interface instructions.
Resetting Computer IP Address
If LMS-188-4P is not communicating with your computer, your computer’s IP address may need to be
manually set. Use the following directions: 1) Get to the ‘Network and Sharing Center’ section either
through ‘Control Panel’ or the internet connection icon on your taskbar. 2) Click on ‘Local Area
Connection’ to bring up the status page. 3) Click properties and then highlight ‘Internet Protocol Version
4 (TCP/IPv4)’ and click ‘Properties’. 4) In this new window, click the option ‘Use the Following IP Address’
and enter the numbers for IP1, IP2 and IP3 from the LMS unit. For IP4, enter any combination of
numbers, 1-3 digits long. Just be sure it is not the same as LMS-188-4P-SM. Subnet Mask is
255.255.255.0 and the Default Gateway is left blank.
Web Pages:
[Main Page]
[Access by entering the IP in browser address bar]