LMS
Operating
Manual
Page
3
Front
Panel
The Multi-Probe Alarm System front panel consists of the following:
Graphic LCD
Channel Status LEDs (
STATUS
)
Alarm LED (
ALARM
)
Audible alarm indicator (buzzer)
Buttons
o
Test & Reset (
TEST/RESET
)
o
Step button (
STEP
)
o
Alarm Limits & decrement button (
vv
)
o
Min/Max & increment button (
^^
)
o
Mute & Menu increment button (
MUTE/MENU
)
Sensor
Probe
The probes supplied with the Multi-Probe Alarm System are highly accurate temperature
sensors. The sensor may be put in water or other mild aqueous solutions from -100°C to 100°C.
NOTE:
Avoid submerging the probe in solvents or harsh chemicals. Use protective thermowells
when monitoring such materials.
NOTE: The warranty does NOT cover damage to probes or electronics that is caused by
exceeding temperature limitations, or damage to probes caused by using them in solvents
or other unsuitable environments.
NOTE:
If the displayed temperature shows a consistent high (> 100°C) or low (< -100°C) value,
most likely, the probe has failed.
