Leonard LES6000F, User Manual

Page: 12 / 28

To remove the dirt:
1.
– Remove immediately: melted plas-
tic, plastic foil, and food with sugar. If
not, the dirt can cause damage to
the appliance. Use a special scraper
for the glass . Put the scraper on the
glass surface at an acute angle and
move the blade on the surface .
–
Remove after the appliance is
sufficiently cool:
limescale rings ,
water rings, fat stains, shiny metallic
discolorations. Use a special cleaning
agent for glass ceramic or stainless
steel.
2. Clean the appliance with a moist cloth
and some detergent.
3. At the end rub the appliance dry
with a clean cloth.
TROUBLESHOOTING
Problem Possible cause Remedy
You cannot activate the appli-
ance or operate it. Activate the appliance again
and set the heat setting in less
than 10 seconds.
Problem with the house electri-
cal system. Examine the fuse in the electri-
cal system of the house in the
fuse box. If the fuses blow
again and again, speak to
qualified electrician.
If you tried the above solutions and cannot
repair the problem, speak to your dealer or
the customer service. Give the data from
the rating plate, three digit letter code for
the glass ceramic (it is in the corner of the
glass surface) and an error message that
comes on. Make sure, you operated the appliance cor-
rectly. If not the servicing by a customer
service technician or dealer will not be free
of charge, also during the warranty period.
The instructions about the customer service
and conditions of guarantee are in the guar-
antee booklet.
INSTALLATION
Warning! Refer to the Safety chapters.
Before the installation , note down
the serial number (Ser. Nr.) from the
rating plate.
The rating plate of the
appliance is on its lower casing.
LES6000F 949 594 290 00
58 CAD 02 ZO
Leonard
220-240 V 50-60 Hz
6 kW
Made in Germany
Built-in appliances
• Only use the built-in appliances after you
assemble the appliance into correct built-
in units and work surfaces that align to
the standards.
12 leonard