FOR ASSISTANCE CALL: 1.888.213.5015 | MON-FRI 8AM-6PM EST
HORIZON SERIES:
HzOTO POWERED SOUNDBAR SETUP GUIDE
7
6
FRONT PANEL
Your Horizon OTO features a Capacitive Touch Display to control the many
functions. When programming a universal remote, see page 8.
TOUCH DISPLAY FUNCTIONS
If your OTO function indicator is not illuminated, tap the display button on the
supplied remote.
1.
HOME:
Press and hold Home for 3 seconds to turn amplifier off. Tap Home
to turn on. NOTE: Tap Home to access other features below.
2.
INPUT SELECTION:
Tap Home, then “Input” to switch between Digital and
Analog.
3.
VOLUME ADJUST:
The Up and Down arrows will adjust volume (volume
control is always active).
4.
BASS ADJUST:
Tap Home until “Bass” is illuminated, then use Up and Down
arrows to adjust.
5.
TREBLE ADJUST:
Tap Home until “Treble” is illuminated, then use Up and
Down arrows to adjust.
REMOTE
Your Horizon OTO ships with a slim form factor remote to easily adjust your settings.
IR REMOTE FUNCTIONS
1.
POWER:
Turn unit on and off. NOTE: Unit will go into standby after 30
minutes of no signal
2.
DISPLAY:
Select display preference: lights on, dim, off. NOTE: Adjustments
to Volume, Bass, Treble and Input are only visible when display is on
3.
VOLUME:
Press Up and Down arrows to adjust volume
4.
BASS:
Press Up and Down arrows to adjust bass
5.
TREBLE:
Press Up and Down arrows to adjust treble
6.
MUTE:
Turn volume off
7.
INPUT:
Switch between Digital and Analog inputs
8.
SYNC WIRELESS:
Initiate wireless pairing to OTO-Rx wireless subwoofer receiver
1 3 2
7
4
6
8
5
1
5
4
3
2
CONTROL
