www.LeonAudio.com.au
Testing the PCinterface to PC serial link
Testing
A 10 second test
•
10 second test command
Header
10 second test command
A quick test that will give the same results as the loop-back test
but without the need for the loop-back connectors.
In this test mode, you will see the following -
Both Tx & Rx lamps on the PCinterface will blink together at
about once per second.
On the Master -
A single
Group A
lamp will light on a channel (1-6) that
corresponds with the address that the Master is set to.
Every Master must be set to a different address.
Group B
lamps slowly chase from channel 1 to 16.
Go and Standby lamps toggle for any channels that have
Outstations connected.
The
{TEST
command does not require the letter
X
for e
X
ecute
to follow the command.
•
•
•
•
67.
{
S
E
T
T