Interfaces
v800-Cabinet
72
Lenze • BA v200-C v800-.C • 1.1
6.1.2
Power supply
Attention
Hazard due to excessive current!
Excessive current can cause overloading of the electronics which could then result in injury or
damage.
The device should only be operated with a power supply that complies with NEC Class 2.
The device must be supplied with 24V +/-25% (18 to 30 V)
(NEC Class 2).
The power supply must be implemented via the 4-pole plug only
(4-pole plug with locking lever, green).
(The figure shows the socket inside the device).
Pin number
Signal name
1
NC *
2
0 V
3
PE
4
24 V
* Prepared for future shutdown function of a UPS
Technical data:
Input voltage:
24V +/-25% (18 to 30 V)
(NEC Class 2)
Max. switch on current:
4 A
