Product description
Identification
l
27
EDKZS3−480A200 DE/EN/FR/ES/IT 3.0
3.3
Identification
Type:
SINUSFILTER
SINE-FILTER
FILTRE-SINUS
L
SSP94SF002
Type code
e
Z
S
3
−
xxxA
xxx
Product series
Accessories
Filter type
S = sinusoidal filter
Phases
3 = 3 phases
Rated current [A] (rounded)
Variant
3.4
Operating conditions
A sinusoidal filter (LC filter) in the motor cable limits the rate of rise of voltage
(du/dt < 500 V/
m
s) and the capacitive charge/discharge currents which occur
during inverter operation. This enables considerably larger shielded motor
cables and the service life of the motor is increased.
The following must be observed when using sinusoidal filters:
ƒ
Use sinusoidal filters only together with standard asynchronous
machines 0 ... 550 V.
ƒ
Operation is only permissible using a V/f or V/f
2
characteristic control.
ƒ
Operation is only permissible using a switching frequency of 2 ... 4 kHz.
–
Ensure that the automatic switching frequency reduction is deactivated
(see documentation of the standard device).
ƒ
Limit the output frequency to maximally 90 Hz.
ƒ
Please note, when dimensioning the controller, that the controller has an
additional load of 10 ... 15 %.
Summary of Contents for L-force EZS3 Series
Page 89: ...Installazione elettrica 6 l 89 EDKZS3 480A200 DE EN FR ES IT 3 0 ...
Page 90: ......
Page 91: ......
