Product extensions
Mounting instructions for shrink disc cover
NOTICE
▶
The loosely enclosed cover is mounted as a protection against accidental contact with the
shrink disc.
Gearboxes G50BS113 ... G50BS195
X
X
Press the cover with integrated mounting pins into the bore holes on the housing flange
Gearboxes G50BS221 ... G50BS245
X
1
2
3
X
1
Shrink disc cover
2
Cheese head screw
3
Reducing bush
1
.
Screw reducing bushes (3) into the threaded holes on the housing flange so that they are
flush using a screwdriver.
2
.
Fasten the cover over the reducing bushes (3) using cheese head screws (2).
Mechanical installation
Mounting
Product extensions
28
