Drive dimensioning
In order to carry out an accurate drive dimensioning process, you can use our configuring
software, the »Drive Solution Designer«.
With the «Drive Solution Designer«, you can design the drive both quickly and to a high
quality. The software contains profound and proven expertise with regard to drive applications
and mechatronic drive components.
Please get in touch with your Lenze representative.
Mains operation
Check operating conditions
Define required input variables
Determine correction factor
Determine product on the basis of the forces
Calculated necessary output torque
Calculate intensity
Determine the product on the basis of the obtained data
Final configuration
Check operating conditions
Check
Approvals
Conformities
Supply voltage
Degree of protection
Ambient temperature
Surface protection
Standards and operating conditions
Surface and corrosion protection
Define required input variables
Necessary input variables
Note
Symbol
Unit
Ambient temperature
T
V
°C
Site altitude Amsl
H
m
Radial force
F
rad
rated
axial force
F
ax
rated
Transmission element at the output
Gear wheels, sprockets …
Effective diameter of the transmission element
d
w
mm
Load torque
M
L,max
Nm
Load speed
n
L,max
rpm
Information on project planning
Drive dimensioning
21
