Operation
Calling up information messages
6
56
EDBPM-H312 DE/EN/FR 2.0
6.3
Calling up information messages
ƒ
Information messages
–
are texts which appear because of a certain event (e.g. if an actual value
exceeds a limit),
–
can only be called up as long as the triggering event is active.
–
must have been programmed in the ”HMI Designer” planning tool.
–
can have a maximum length of 4 lines at 20 characters each.
ƒ
The operating unit does not indicate whether an information message is
available or not.
If you want to ...
Touch the fields...
Example
A
... call up an information message.
Help
Esc
Pressure exceeds saftey
limit
B
... select the next information
messages.
F1
or
F2
Water level below working
treshold
C
... close the information messages.
Help
Esc
6.4
Calling up help messages
ƒ
Help messages
–
can be assigned to page or information messages.
–
contain useful notes to make handling easier.
–
must have been programmed in the ”HMI Designer” planning tool.
ƒ
The operating unit does not indicate whether a help message is available for
a page or an information message.
If you want to ...
Touch the fields...
Example
A
... call up a help message.
shift
+
Help
Esc
B
... close a help message.
Help
Esc
